01-05 WRX 2.0 UK/EURO  STD 218/225 BHP

Level 1 260-280 bhp

Full Decat or Sportscat exhaust from turbo back 2.5 or 3” bore
Ecutek Custom ECU recalibration (similar to PPP)
Twin boost set up for high/low power switchable in-car
Walbro 255 l/hr uprated fuel pump       
K+N panel filter

 

Level 2 290-310 bhp

Full Decat or Sportscat exhaust from turbo back 2.5 or 3” bore.
Decat uppipe Pre turbo
Walbro 255 l/hr uprated fuel pump
K+N panel filter
Ecutek Custom ECU recalibration
Twin boost set up for high/low power switchable in-car    
AFP 04-H custom ported hybrid turbo
High Flow multi spray fuel injectors 550cc (380cc as std)
Uprated turbo to intercooler 'Y' pipe       
NGK PFR 7B uprated spark plugs

 

Level 2(a)   300-320 bhp

Substitute  VF34/35 or TD05-16G turbo in place of AFP04H for additional 10-20bhp but with slightly later turbo spool up.  


Level 3 360-390 bhp

Full Decat turbo back 3” bore exhaust system
Tubular exhaust headers and flow matched uppipe
Walbro 255 l/hr uprated fuel pump
K+N panel filter
EcuTek custom ECU calibration.
Twin boost set up for high/low power switchable in-car
550cc Multi Spray Injectors
Fuel Lab turbo specification fuel pressure regulator with fitting kit & gauge  
STI TMIC from 01-06 STI including undertray
AFP 05-20G custom ported turbocharger modified to fit with TGV
NGK PFR 7B uprated spark plugs

Level 3 Power may shorten the life of the transmission system this will depend on use and driving style. The 01 onwards UK 5 speeds do currently seem to be coping well with this level of output although as mileage increases this may become more of an issue.


Level 4 390-410 bhp

Full Decat turbo back 3” bore exhaust system
Tubular exhaust headers and flow matched uppipe
Walbro 255 l/hr uprated fuel pump
EcuTek custom ECU calibration.
Twin boost set up for high/low power switchable in-car
STI TMIC from 01-07 STI including undertray
AFP 321H custom turbocharger with fitting kit
Twin port 650cc Injectors
Custom cold air induction system

 

Level 5 420-450 bhp

Full Decat turbo back 3” bore exhaust system
Tubular exhaust headers and flow matched uppipe
Walbro 255 l/hr uprated fuel pump
Twin port 650cc Injectors
EcuTek custom ECU calibration.
Twin boost set up for high/low power switchable in-car
Fuel Lab turbo specification fuel pressure regulator with fitting kit & gauge  
STI TMIC from 01-07 STI including undertray or optional FMIC
AFP 321T custom turbocharger with fitting kit
Custom cold air induction system
AVCR boost controller
NGK racing 8 spark plugs
 

Note We do not recommended level 4-5 on standard internals, clutch or gearbox. As a mimium we recommend forged pistons
and steel rods, steel head gaskets, uprated clutch. We also recommend either a PPG gear kit or 6 speed gearbox conversion ( from later STI)

PLEASE NOTE

We have included the tuning section us a guide to what we consider to be the most cost effective steps during tuning. This has been compiled with the benefit of experiencing hundreds of upgrades. There are other parts/turbos that can be substituted but the listed parts we have found to give the most consistant results over many installations.

Your own ideals may vary depending on the parts you may currently have fitted.

Our suggested levels are compiled to mimise incompatible components, it is not ideal to fit a turbo that your fuel system cannot support for example,

We do not do parts fitting here so I can't give you a full price, the components in the tuning stages are listed in order to allow you to select the most cost effective route to power and in turn allow us to achieve the best results from your car.

Our core business is ECU Custom Mapping and Hybrid turbocharger design/building. We are not here to try and sell you the parts with the biggest profit margin, we can however supply (for local collection or mail order) all the tuning parts listed if required. Optionally you can source them yourself or arrange for the garage doing the fitting to supply them. The individual parts prices can be found on the website on their respective pages

We can recommend specialist garages within a 100 mile radius that work with us on a regular basis to fit the parts if required. These garages have been specially selected as places that are very experienced specifically with Subarus and work on a daily basis with this type of car. We recommend them as we know they will look after your car and their attention to detail will ensure maximum reliability. It is perfectly safe to have the parts fitted and then drive to us off boost (this still allows cruising at 70mph) for final setup and custom mapping. We have had cars drive over 400 miles to have this done.

Predicted BHP figures are approximations, our section on “rolling roads” explains in some detail why it is impossible to give exact figures.